 Automotive window tinting is one of the popular vehicle modification that can enhance the aesthetic look. Window tint shades are available in different darkness levels depending on your window tinting needs. Tint application can be done by professionals in a shop or you may opt to do it yourself with DIY kits.
Sometimes, a window tint job may start to look bad as it appears peeling and bubbles come into sight. This means you need it fixed to make it look good again. If that applies to you, here's what you can do to fix a bad window-tinting job on your car. Use professional window tinting service. The best way to fix a bad window tinting job is to seek the help of a tinting specialist. They can fix it for you as the tint job is still under warranty. They can do window tint removal Willowbank the right way and re-install it properly to get the best look. If you choose to fix a bad window tinting job yourself, follow these directions. Remove bubbles. You can get rid of the bubbled area by using a hair dryer to thaw the window film adhesive. Heat the bubbled area with a hair dryer to soften the film adhesive. Then press out the bubbles with a credit card or small squeegee. Fix peeling parts. Re-adhere the peeling parts by using a dish soap and water solution. Wash the back of the peeling film with the solution and use a squeegee to level the film back over the window. Then let the film dry completely.
0 Comments
Leave a Reply. |