Want to remove your car window tint? Perhaps you bought a vehicle with tints that already unpresentable or installed with a low standard of quality, and you want to take them off and have a new one installed.
Either way, window tint removal Booval isn’t a challenging job, but there are certainly a few tricks you need to know to make the job much more easily. Here is a simple trick to remove your car window tints.
First, you will have to prepare your materials and supplies. Here is what you all need:
Prepare your car and window to be fixed. Park in the sun. The key here is to make sure that you do it under direct sunlight to get it hot.
Roll the window down just a little bit and cover the inside of the window with soapy water so that the plastic from the bag sticks to it. The plastic bag will create some condensation between the tip and the glass that will release the glue and the tint off the glass without having to scrape it and make a mess all over the place and wind up spending a lot of time to complete.
Use the Teflon card or whatever plastic card to tuck the plastic bag into the corners so that every part of the window is covered. Make sure the bag is nice and flat on the glass. You may apply more soapy water while levelling the bag to make sure everything is nice and flat. Then, wait. On a nice sunny day, it will not take more than 15 minutes to get it hot.
The strong heat sizzling through the plastic bag on the outside will have worked together with the soapy water to allow you to lift the film off. Use the razor blade to create a tab at the top edge of the window. Grab the tab, pull it until the whole film is lifted.
When window tint removal is done properly, you can actually get the job done in less than an hour. If you are not the DIY type of guy, you may opt to have a tint specialist do the job for you.