Taking tint off back window can be tricky, especially if you want to protect the defroster lines. Here’s how to do it safely and easily: Gather Your Supplies You will need a hairdryer or heat gun, a spray bottle with soapy water, a razor blade or plastic scraper, a clean cloth, and a trash bag or plastic wrap. Heat the Tint Use a hairdryer or heat gun to warm the tint. Hold it a few inches away from the window and move it back and forth slowly. The heat will soften the glue, making the tint easier to peel off. Start Peeling When the tint is warm, lift one corner with your fingernail or a razor blade. Slowly and gently peel the tint back. Try to keep it in one piece to avoid leaving small bits behind. Spray Soapy Water As you peel the tint, spray the sticky side with soapy water. This helps loosen the glue and makes it easier to remove the tint. Keep spraying as you peel. Use a Plastic Scraper If the tint tears or small pieces are left behind, use a plastic scraper to remove them gently. Avoid using a metal razor blade on the back window, as it can scratch the glass and damage the defroster lines. Remove Glue Residue After the tint is off, you might have some glue left on the window. Spray the area with soapy water and use a plastic scraper or a clean cloth to rub off the residue. You can also use a glue remover, but make sure it’s safe for car windows and defroster lines. Clean the Window Once all the tint and glue are gone, clean the window with glass cleaner and a soft cloth. This will make your back window clear and streak-free. Be Patient and Take Your Time Removing window tint can take time, especially if it’s old and brittle. Be patient and work slowly to avoid damaging the window or defroster lines. These steps can safely take tint off back window without damaging the glass or defroster lines. Taking your time and using the right tools will make the job easier and more successful. Comments are closed.
|