Automotive window films can make your car look amazingly beautiful. There are mobile window tinting Eastern Heights services you can use to help you install window films to your car. If you are considering to have one installed by yourself, here are some pointers to help you install window films properly.
The things you need to prepare for the tint installation include a pre-cut window tinting kit, spray bottle, cutting knife, squeegee, microfibre cloth, tint solution and a bucket
Don’t just placed the tinting kit as it is. The outcome of the car window tint installation will depend on how much effort you are placing on the preparation. Find a good place where the car will not be subjected by dirt and wind like in a garage.
The process will include a lot of cleaning. Clean the inside of your car to make sure that there are no dust and dirt in the air. There should be no stickers on both the inside and outside of the windows. If there is a sticker, use a scourer to remove it and its residue. Wipe the rubber seals around the window, apply tinting solution using a cloth for the trim.
Use a squeegee, microfibre solution and tint solution for the window. Wet the cloth and wipe the window completely. This may take some time since little particles will just keep on showing up and you have to keep on cleaning the window until the cloth is finally free from those particles.
Clean all the glass edges. Lower the window by 5 -10 cm before cleaning it again. Also, remove the excess solution on the window using the squeegee. Both sides of the window should be well cleaned.